Wax heater for cartridges with thermostat

Roll-on wax heater for 100 ml cartridges with thermostat

• Extremely suitable for professional use
• Allows for fast and even heating of the wax cartridge (100 ml) and keeps the temperature within a preset range (60-100°C)
• Eliminates the risk of overheating the wax
• Suitable for heating all 100 ml cartridges on this website.

  Instructions for use:

  1. Place the device on a flat surface and plug in the power cord.

  2. Place your resin cartridge in the device (Remove the seal if necessary) and replace the cap on the cartridge holder.

  2. Heat the device for about 20 minutes on the highest setting (105 degrees).

  3. Once the wax has melted, turn the temperature back down to a medium temperature (around 80 degrees).

  To test if the wax is hot enough, try rolling the wax roller through on a resin strip.

  If the wax is warm enough, it will come out easily. If not, the wax is not yet liquid enough.

  4. For temperature, always test on a small piece of skin first, if it is not too hot you can start waxing.